Naida CI Q30 Ear Hook Replacement

The AB Q30 Ear Hook is a replacement ear hook for the Advanced Bionics Naída CI Q30 cochlear implant sound processor. It clips onto the top of the processor and curves over your ear, holding the Q30 securely in place all day. It matches part number CI-5710, available in small (CI-5710-100) and standard (CI-5710-200) sizes.

This ear hook is for the Naída CI Q30 cochlear implant processor, not the Phonak Naída hearing aid, which uses its own hooks and tubing. Ear hooks are small, inexpensive parts, but when one cracks or loosens, the whole processor starts to slip. This page helps you check the fit, pick the right size, and get a new AB Q30 Ear Hook on quickly.

AB Q30 Ear Hook at a glance

Fits	Advanced Bionics Naída CI Q30
Part number	CI-5710
Sizes	Small CI-5710-100, standard CI-5710-200
Default option	Standard ear hook; message us before ordering if you need small
Type	Third-party replacement, compatible with the Naída CI Q30
Colour	As shown in the product photo
Price	$20
Dispatch	24–48 hours
Guarantee	Replaced or refunded if defective or wrong

The AB Q30 Ear Hook has no electronics inside. It is a shaped plastic hook that keeps the processor positioned behind your ear while the built-in microphones on the Q30 pick up sound. That makes it one of the simplest parts to replace yourself at home.

Will this AB Q30 Ear Hook fit my processor?

Processor	Fits?	Order this
Naída CI Q30	Yes	This product
Naída CI Q70	Same CI-5710 part	Naida CI Q70 ear hook
Naída CI Q90	Same CI-5710 part	Naida CI Q90 ear hook
Naída CI M90 (Marvel)	No	Different processor design
Advanced Bionics Harmony	No	Harmony uses Auria ear hooks
Phonak Naída hearing aid	No	Hearing aid hooks are a different shape

To confirm your model, read the label on the processor casing or check your clinic paperwork. If your current hook is a T-Mic 2 with a thin microphone arm, you can still switch to this plain ear hook; see the comparison below.

Still unsure? Send a photo of your processor and old hook on WhatsApp and we will tell you which part matches.

The Q range shares one ear hook design, which is useful if you have a spare from an older processor. A hook from a Q70 or Q90 will fit your Q30, and vice versa, so families with more than one Naída CI Q processor can pool their spares.

Small or standard: choosing an AB Q30 Ear Hook size

The ear hook comes in two sizes. The difference is the length and curve of the hook over the top of the ear.

Size	Usually suits	What you notice
Small	Children and adults with smaller ears	Processor sits closer to the ear, less movement
Standard	Most teenage and adult ears	The everyday choice for most Q30 wearers

The easiest way to choose is to match the size you already wear. If the processor rocks forward or sits away from your head, a smaller hook may help. If the hook presses on the top of your ear or leaves a red mark, try the standard size.

Growing children often move from small to standard, so parents tend to keep one of each in the school bag.

Comfort matters more than most people expect. A hook that is slightly wrong for your ear can be fine for an hour and sore by evening, and soreness is one of the main reasons people stop wearing their processor for part of the day. If you wear glasses, check the fit with them on, because the glasses arm and the hook share the same space behind the ear.

Signs your ear hook needs replacing

Ear hooks wear slowly, so the change is easy to miss. These are the signs users notice most:

• The processor slips off when you bend down, take off a hat or put on glasses.
• A crack at the base of the hook, where it meets the processor.
• The hook no longer clicks firmly and wobbles on the connector.
• Plastic has turned yellow, cloudy or brittle after months of sweat and sun.
• The tip is chipped or rough and rubs behind the ear.
• It snapped after the processor was dropped or sat on.

A loose hook can let the processor tug on the headpiece cable, which may cause sound to cut in and out when you turn your head. Replacing the AB Q30 Ear Hook early protects the cable as well.

Look at your hook under good light every few weeks. Bend your ear forward slightly in a mirror and check the underside of the hook, where cracks usually start. Hairline cracks can open suddenly, often at the worst moment, so it is worth replacing a cracked hook straight away rather than waiting for it to snap.

How to fit the AB Q30 Ear Hook

1. Switch off your Naída CI Q30 and remove it from your ear.
2. Hold the processor body firmly in one hand.
3. Grip the base of the old hook and pull it straight off the connector. Do not twist or lever it with a tool.
4. Check the connector area for dust or residue and wipe it with a dry cloth.
5. Line up the new AB Q30 Ear Hook with the connector and press until it seats firmly.
6. Give it a gentle tug to make sure it is secure.
7. Put the processor back on and check it sits comfortably, then switch on.

If the hook will not seat, check that you have the right part and that nothing is blocking the connector.

AB Q30 Ear Hook troubleshooting

Problem	Likely cause	What to do
Processor falls off when I move	Hook too big, worn or loose	Try the small size or replace a worn hook.
Hook presses on the top of my ear	Hook too small for your ear	Try the standard size.
New hook will not click in	Debris on connector, or wrong part	Clean the connector; confirm you have the CI-5710 hook.
Red mark or soreness behind the ear	Rough edge or poor fit	Replace a chipped hook; try the other size.
Sound cuts out when I turn my head	Loose processor tugging the cable	Fit a new hook; if it continues, check your Q30 headpiece cable.
Hook keeps cracking	Drops, or brittle aged plastic	Replace it and store the processor in its case at night.

Sports, gardening and hot weather all speed up wear, because sweat and sun break down the plastic over time. If you are very active, keep a spare hook in your bag so a crack on a day out does not leave you holding your processor in your hand.

Parents of young children may find hooks wear faster, as small processors get pulled, dropped and chewed. Having two or three spares at home is common and costs little.

How to make your AB Q30 Ear Hook last longer

• Wipe the hook with a soft, dry cloth at the end of each day to remove sweat and skin oils.
• Avoid alcohol wipes and solvents, which can make plastic brittle.
• Keep the processor out of direct sunlight on car dashboards and windowsills.
• Store it in its case or a cochlear implant dryer overnight.
• Take the processor off before putting on or removing tight hats and helmets.

Ear hooks are wear parts. Many users replace them every few months to once a year, depending on sweat, sun and how active they are.

Is a replacement AB Q30 Ear Hook safe for my processor?

Yes. This is a third-party ear hook made to fit the Naída CI Q30 connector to the CI-5710 specification. It carries no electrical current and does not change your program or your sound. Its only job is to hold the processor in the right position.

We check each hook for fit and finish before dispatch. If it arrives damaged or is not the part you ordered, we replace it or refund you. We are an independent supplier and are not part of Advanced Bionics.

Ear hook or T-Mic 2 on a Q30?

On the Naída CI Q30, the ear hook position can hold either this plain hook or a T-Mic 2. The plain hook relies on the microphones built into the top of the processor. The T-Mic 2 adds a small microphone that sits at the entrance to your ear canal, which many people find more natural, especially on the phone.

Many people keep an AB Q30 Ear Hook as a backup even if they normally wear a T-Mic. If the T-Mic fails, a plain hook keeps the processor on your ear while you wait for a replacement Naida CI Q30 T-Mic 2. Your audiologist can tell you which microphone setting your program uses.

Whichever you choose, having both parts on hand gives you flexibility. Some users prefer the plain hook for sport and windy days and the T-Mic 2 for work and phone calls, switching between them in under a minute. Others keep the plain hook purely as an emergency spare in the processor case.

Shipping, payment and returns for the AB Q30 Ear Hook

Every AB Q30 Ear Hook order is packed and dispatched within 24–48 hours with tracking. Delivery usually takes 12–22 business days worldwide, and duties are handled for you on most routes, so there is nothing extra to pay at the door. Shipping is free on orders over $250, which is easy to reach if you add a spare cable or charger.

Payment runs through a secure payment gateway with all major cards. If we send the wrong item, or the part arrives defective or damaged, message us within 14 days with a short video. We replace it or refund you, and we cover the return shipping. Change-of-mind returns are not accepted on hygiene-sensitive hearing parts. Full details are in our return policy.

Other Naida CI Q30 parts you may need

Keep your Naida CI Q30 working with these matching spares:

• Naida CI Q30 T-Mic 2 – Microphone at the ear canal entrance.
• Naida CI Q30 UHP headpiece cable – Fixes cutting-out sound from a worn cable.
• Naida CI Q30 PowerCel 230 battery – Full-size rechargeable battery.
• Naida CI Q30 PowerCel 110 Mini – Lighter rechargeable battery.
• Naida CI Q30 charger – PowerCel charger CI-5605.
• Electric dryer – Keeps hooks and processor dry overnight.

AB Q30 Ear Hook FAQ

Which size AB Q30 Ear Hook do I need?

Most adults wear the standard hook. Children and people with smaller ears often need the small one. If you are unsure, match the size you wear now.

How do I order the small size?

The listing defaults to the standard hook. Message us on WhatsApp before ordering if you need small.

Does the ear hook affect my hearing?

No. It is a plastic hook with no electronics. Your sound comes from the processor microphones.

Can I use it instead of my T-Mic 2?

Yes. It fits the same position. Ask your audiologist whether your program needs adjusting.

Will the Q70 or Q90 hook fit my Q30?

Yes. The Q30, Q70 and Q90 use the same ear hook part.

Does it fit the Phonak Naída hearing aid?

No. It is only for the Naída CI Q cochlear implant processors.

How often should I replace it?

When it cracks, loosens or yellows, or every few months to a year with daily wear.

Is it difficult to change?

No. It pulls straight off and presses straight on, no tools needed.

Questions about your Naida CI Q30? Message us on WhatsApp (+1 520 473 4179) with a photo of your processor and we confirm the right part before you pay.